solubility of solids


Solubility of a substance is one the properties of chemical compounds. It is the amount of a substance that dissolves in a given solvent. (This because not all compounds dissolves in water, some dissolves in organic and inorganic compounds). It is a measure of the maximum amount of the solute that will dissolve in the solvent at equilibrium point or at saturation point.

Compounds have substances they dissolve in like ethanol is miscible with water while kerosene is immiscible in water unless a detergent is use as an emulsifier. Also to a degree it will still separate. Reason for this action is the difference in polarity as non polar solvents cannot dissolve on polar solvents. Therefore beyond equilibrium point of dissolution a super saturated solution can be obtained which is meta-stable. (This can be a pure solution or mixture).

As discussed earlier, insolubility ifs a function of polarity of the solvents involved; the process a substance dissolves in a solvent is called dissolution. If compounds of the same polarity come in contact, the unlike ions forms an inter-molecular forces such as hydrogen bonds. This case is seen in dissolution of sodium chloride in water; the ionic lattices separate and are solvated with water molecules.    see this

   Solubility of liquids in liquids

Liquids mix in proportion with each other therefore, they have mutual solubility and are said to be miscible. Example is the mixture of gasoline with two cycle motor oil. The implication of polarity difference in like substances results to inter-molecular forces that lead to high boiling points of mixtures. This is because the dipole- dipole moments between the molecules are very high.

There are cases of partial solubility; the case of bromine and water. The mutual solubility is partially immiscible. Here, bromine is considered a non polar substance, and the partial solubility gives layers of two liquids involved. This is seen in the deep red color of bromine in water and partially clear water at the lower side of the vessel. chemical equilibrium

Solid solution in liquids

This part is explained by the dependence of solubility on temperature. The increase in temperature increases solubility. But the case of cerium sulfate is an objection to this law. it is on this dependence in temperature that super saturation is possible. It is worthy of note that some compounds dissolves sparingly at high temperatures; in this case decantation is carried out.

The graph below shows the solubility of some compounds;

Factors affecting solubility


The polarity of substance plays major role in solubility; as substance with the same polarity dissolves in each other.


Basically, the solubility of substances increases with increase in temperature. Here stirring of the dissolving mixture is encouraged. Stirring the mixture does not affect solubility but helps in speeding up the dissolution of the mixture.

Molecular size

The size of the molecules of compounds affects solubility.  Smaller molecules cannot surround larger molecules.

About blessed 85 Articles
[contact-form][contact-field label='subscribe' type='email' required='1'/][/contact-form] chemicalengineeringnob is a site that integrate people in chemical Engineering field and other related field in order to share knowledge and to bring to us the updates on the technological trend in technology and address some social issues prevalent in our society


Leave a Reply

Your email address will not be published.